Road signs in the United Kingdom

A non-primary road sign near Bristol shows Guildford Rules patches.

Road signs used in the United Kingdom conform broadly to European norms, though a number of signs are unique and direction signs omit European route numbers.

There is a vast range of signs in use on British roads, from directional sign posts, to signs warning of possible hazards ahead, and regulatory signs instructing motorists to perform certain actions.


A pre-Worboys road sign on Meadrow, in Farncombe. Only a handful of these pre-1963 signs still exist.

Modern British road signage can be traced to the development of the "ordinary" bicycle and the establishment of clubs to further the interests of its riders, notably the Cyclists' Touring Club (CTC), the National Cyclists' Union (NCU) and the Scottish Cyclists' Union (SCU). By the early 1880s all three organisations were erecting their own cast-iron "danger boards". Importantly, these signs warned of hazards, rather than just stating distances and/or giving direction to places, acknowledging the fact that cyclists, like modern motorists, were unlikely to be familiar with the roads they were travelling along and were travelling too fast to take avoiding action without prior warning. In addition, it was the cycling lobby that successfully pressured government in 1888 into vesting ownership of and responsibility for roads with county councils in previously established highway districts (HDs) that would be funded from taxation rather than tolls. The HDs were active in the erection of semi-standardised directional signs and mileposts in the latter years of the 19th century.

The rise of motoring after 1896 saw the pattern repeated. The larger motoring clubs, notably The Automobile Association (AA) and the Royal Scottish Automobile Club (RSAC) erected their own, idiosyncratic warning boards and direction signs on a wide scale. In addition, under the Motor Car Act 1903, four national signs were created, supposed to be set at least 8 ft from the ground and 50 yards from the reference point. These signs were interesting in being based on shape, rather than text or image; a white ring (speed limited as marked on a small information plate below it); a white (sometimes red) diamond (a "motor notice" such as a weight restriction, given on a plate below); a red disc,(a prohibition); and a red, open triangle (a hazard or warning). These latter two could be given detail by the attachment of an information plate below, but often it was left to the motorist to guess what the sign was referring to and local variations as to the definition of what was a prohibition or just a "notice", for instance, were common. In spite of this confusing beginning, this format of sign was to develop into the British road sign that was standard from 1934 until 1964. Before this time, until 1933, when regulations for traffic signs were published under powers created by the Road Traffic Act 1930, "national" road signage specifications were only advisory.[1]

"Torch of Knowledge" sign at Blackawton, Devon[2]

Following a review of 'national' signage in 1921 a limited number of warning and hazard information plates were enhanced by the use of symbols, rather than text only. Such symbols had been developed in continental Europe as early as 1909, but had been dismissed by the UK, which favoured the use of text. The symbols were simple silhouettes, easy to 'read' at a distance. Some were peculiarly British: 'SCHOOL' (and later 'CHILDREN') depicted by the flaming torch of knowledge. The government was to make increasing efforts to standardise road signs in the Road Traffic Act 1930 (RTA) and regulations of 1933, being finally consolidated with the publication of the 1934 Road Traffic Acts and Regulations handbook. These saw the end of the very individual black and yellow vitreous enamel AA signs (although the AA was still allowed to erect temporary direction signs, and still does). While the RSAC had ceased erecting signs, the Royal Automobile Club (RAC) had begun to do so to RTA specifications (save for the inclusion of the RAC badge) and was very active in this respect in the late-1930s.

The national British signs were now a red disc (prohibition), a red open triangle (warning/hazard), a red ring (an order), and a red open triangle in a ring for the new (1933) warning with order 'SLOW - MAJOR ROAD AHEAD' and 'HALT AT MAJOR ROAD AHEAD' plates (the predecessors of 'GIVE WAY' and 'STOP' respectively). All signs were to carry information plates mounted below them, the warnings or hazards being illustrated with a wide range of prescribed symbols, but with a text panel below, being only text where no symbol existed. Lettering and symbols were black on a white ground except for orders (like 'TURN LEFT') which were white on blue. New to the UK were the first combination sign, which incorporated information on the sign itself, the 30 miles per hour speed restriction (introduced in 1934), with '30' in black letters on a white disc (the information) surrounded by a red ring (the order sign). It was accompanied by its 'derestriction' a white disc with a diagonal black band bisecting it. Neither of these signs required separate information plates. The 1934 RTA&R also clarified direction and distance signage which also remained in that form until 1964. All signs were mounted on posts painted in black and white stripes, and their reverse sides were finished black, green, or more rarely (usually after repainting) white. The 'HALT' plate was unique in being T-shaped; orders were mainly landscape and warnings always portrait. Sizes were strictly prescribed, the warning plate being 21x12 inches with the surmounting triangle 18 inches equal.

In preparation for invasion during World War II, all navigational signposts and railway station signs were removed, to confuse potential enemy ground movements.

Old-style sign warning of a school ahead, still in existence in Glastonbury, Somerset.

The national signs were subject to minor modification, mainly in the early post-World War II years. For instance, 'SCHOOL' became a schoolboy and girl marching off a kerb, 'CHILDREN' a boy and girl playing handball on a kerb's edge. A train 'CROSSING NO GATES' was given a more toy-like locomotive. Meanwhile, the triangle was inverted for 'HALT' and 'SLOW', while 'NO ENTRY' became a combination sign - a red disc bisected by a horizontal white rectangle bearing the lettering. Orders were now black on white, save for 'NO WAITING', which was black on yellow in a red ring. Some of these changes were part of an attempt to reflect European standards.

Early road signs were usually cast iron, but this was increasingly displaced by cast aluminium in the 1930s. Cast signs were designed to be maintained by being repainted with the raised lettering and symbol easily picked out by an untrained hand. This sort of sign was sometimes given an element of night use by the inclusion of glass reflectors. An alternative to casting and painting was vitreous enamelled sheet iron or steel. In the 1950s cast signs were quickly displaced by sheet metal (usually aluminium) coated with adhesive plastics; these could be made reflective, famously by Scotchlite. Such signs had become almost universal by the reforms of the early 1960s.

The major reform of UK road signage to better reflect European practice happened in two stages. The first was associated with the first motorway construction project and the development of a signage system for it by the Anderson Committee of 1957. Although it was additional to the existing signage, it set a number of benchmarks that were developed under the Worboys Committee of 1963 that was largely responsible for the road signage system effected from 1964, which is still current. Until Worboys, the most notable differences between European signs and those in the UK was their reliance on symbols without text wherever possible, thereby increasing the internationalism of their 'language', together with their combined nature, for instance the warning signs having the symbol inside the triangle instead of on a separate information plate. The Worboys Committee recommended that such practices were adopted in the UK and the 'New Traffic Signs' of 1964 were part of the most comprehensive reformation of the UK streetscape that the country has experienced. Unlike previous government efforts to regulate signage, which tended to be cumulative, Worboys argued a modernist position of starting from zero, with all previous signs being deemed obsolete, illegal even, therefore subject to total and systematic replacement. As a result, local authorities were charged with massive resignage programmes. Order and Prohibition signs were almost all replaced within a couple of years, with the warning and direction signs taking somewhat longer. Few pre-1964 warning signs survived more than about ten years, and, while direction signs were similarly replaced, more have survived as they were not deemed as essential as the others in regulatory terms.

The system currently in use was mainly developed in the late 1950s and the early 1960s, with additional colour-coding introduced in the mid-1980s. There were three major steps in the development of the system.

Anderson Committee

In 1957, a government committee was formed to design signs for the new motorway network. A system was needed that could be easily read at high speed. Colin Anderson, chairman of P&O, was appointed chairman; T. G. Usborne, of the Ministry of Transport had charge of proceedings. Two graphic designers were commissioned to design the system of signage: Jock Kinneir and his assistant (and later business partner) Margaret Calvert. The new signs were first used on the Preston bypass in 1958.[3]

Worboys Committee

Main article: Worboys Committee

The UK government formed another committee in 1963 to review signage on all British roads. It was chaired by Sir Walter Worboys of Imperial Chemical Industries. The result was a document that defined traffic signing in Britain: Traffic Signs Regulations and General Directions (TSRGD). It was first introduced on 1 January 1965 but has been updated many times since. It is comparable with the Manual on Uniform Traffic Control Devices in the United States. The TSRGD is a Statutory Instrument that prescribes the sign faces and permitted variants that may be used on UK roads. The TSRGD is supported by the Traffic Signs Manual (TSM), which consists of 8 separately-published chapters which provides "the codes to be followed in the use, siting, and illumination of signs both on all-purpose roads and motorways. It also covers temporary signs for use in connection with road works, in emergency by the police, and temporary route signing by motoring organisations and highway authorities."

Guildford Rules

As part of an effort to eliminate sign clutter in the mid-1980s, a colour-coding system was developed to indicate information pertaining to different categories of route on a single sign. The system became known as Guildford Rules, after the town of Guildford, where experimental versions of this signing system were tested.


A rare (potentially illegal) road sign with metric units in St Albans, Hertfordshire
A sign at the Magic Roundabout in Swindon showing a rather unorthodox method of incorporating mini-roundabouts into signage. (The correct method, introduced in the 1994 TSRGD, is to use a black disc with a central white dot for each mini-roundabout.) This peculiarity is common in Wiltshire.

Road signs in the United Kingdom are governed by an extremely complex and detailed set of guidelines. The basic units of measurement used by sign designers are the 'x-height' (the height of the lower case letter 'x') and the 'stroke width' (sw) (4 sw = 1 x-height). The sizes of borders, symbols and arrows and the spacing and layout of the sign face are expressed in sw, so that all the elements remain in proportion. The x-height of a sign is dictated mainly by the speed of traffic approaching it, hence 300mm x-heights are common on motorways, whereas parking signs are mostly at 15mm or 20mm x-height.[4]

Traffic signs are generally designed using specialist computer software. The two most popular systems are SignPlot from Buchanan Computing, and KeySign[5] (previously AutoSign) from Key Traffic Systems, originally developed in the 1980s by Pete Harman and Geoff Walker whilst working for Humberside County Council.


Almost all signs have rounded corners. This is partly for aesthetic reasons. It is also safer for anyone coming into contact with a sign, and it makes the sign more durable, as rain is less likely to corrode the corners.

Units of measurement

The United Kingdom is the only European country to use mostly imperial units rather than SI units on road signs for distance measurements and speed limits, and one of few countries in the world (the United States and Burma being examples of others) to do so.[6][7] Vehicle weight limits are signed only in metric (TSRGD 1981), and metric units may be used in addition to imperial ones for height, width and length restrictions.

From March 2015, all new height and width restrictions are to have dual metric-imperial units.[8] This is because of the disproportionate number of bridge strikes involving foreign lorries (between 10 and 12% in 2008). Originally, the government planned to make dual units mandatory on new height warning and restriction signs on 9 April 2010.[9][10] but it was not included in the 2011 amendment to the TSRGD. Finally, in November 2014 it was announced that all new height and width restriction signs installed from March 2015 would have dual metric-imperial units.[11]

However, road sign distance metrication is not on the UK government agenda.


Three colour combinations are used on Worboys direction signs depending upon the category of the route. All roads are categorised as either motorways (white on blue), primary routes (white on dark green with yellow route numbers), or non-primary routes (black on white).[12][13]

TSRGD 1994 also prescribed a system of white-on-brown direction signs for tourist and recreational attractions. TSRGD 2002[14] contains the current standards and includes a sophisticated system of black-on-yellow signs for roadworks. A revision to TSRGD 2002 is expected to come into effect in 2016.

On Advance Direction Signs, as introduced under the Guildford Rules, the background colour indicates the category of route on which it is located.[13] On all directional signs, destination names are placed on the colour appropriate to the category of route used from that junction.[13] A panel of one colour on a different colour of background therefore indicates a change of route status.[13] A smaller area of colour, called a patch, surrounds a bracketed route number (but not its associated destination) to indicate a higher status route that is joined some distance away.[13] A patch may only be coloured blue or green.[13]

Signs indicating a temporary change, such as roadworks or route diversions, are denoted with a yellow background. Usually these signs use a simple black on yellow colour code, more complex signage use the conventional signs superimposed onto a yellow background.

In some areas, such as the Dartmoor National Park, additional signs and colours are used to distinguish road conditions. In addition to the national colour schemes, the park also uses white signs with a light blue border and text to denote routes suitable for medium-sized vehicles and white signs with a brown border and text for routes suitable for cars and small vehicles only. The park also uses fingerpost signs for routes suitable for local traffic only. These routes are publicised in park leaflets and other media.[15]

For ease of reference, the main colour-coding rules may be summarised as below:

Sign background Border Lettering Usage Ruleset
BrownWhiteWhiteRecreational attractions
GreenWhiteWhite with yellow route numbersPrimary routeWorboys
WhiteBlackBlackNon-primary routeWorboys
WhiteBlueBlackLocal destinationsDiscontinued in favour of black border co-use
WhiteRedBlackMinistry of Defence sites

The colour-coding for panels on signs may be summarised as below:

Panel background Border Lettering Usage Ruleset
BrownWhiteWhiteRecreational attractionsGuildford
GreenWhiteWhitePrimary routeGuildford
WhiteRedBlackMinistry of Defence sitesGuildford


Two typefaces are specified for British road signs: Transport and Motorway.

Transport is a mixed-case font and is used for all text on fixed permanent signs except route numbers on motorway signs.[4] It is used in two weights: Transport Medium (for light text on dark backgrounds) and Transport Heavy (for dark text on light backgrounds).[4]

Motorway has a limited character set consisting of just numbers and a few letters and symbols needed to show route numbers; it has elongated characters and is designed to add emphasis to route numbers on motorways.[4] Motorway is used to sign all route numbers on motorways themselves, and may also be used on non-motorway roads to sign directions in which motorway regulations apply immediately (such as motorway slip roads). Motorway Permanent is light characters on a dark background; Motorway Temporary is dark on light.

Transport Medium and Motorway Permanent were developed for the Anderson Committee and appeared on the first motorway signs. The other two typefaces are similar but have additional stroke width in the letters to compensate for light backgrounds. These typefaces are the only ones permitted on road signs in the UK. Although signs containing other typefaces do appear occasionally in some places, they are explicitly forbidden in government guidelines, and are technically illegal.


Signs in Wales are generally bilingual, such as this "historic route" sign on the A5 near Menai Bridge.
Multilingual sign in Kent.
Place names in Gaelic are becoming increasingly common on road signs in the Scottish Highlands.

Bilingual signs are used in Wales. Welsh highway authorities, until 2016, could choose whether the signs in their area were "English-priority" or "Welsh-priority", and the language having priority in each highway authority's area appeared first on signs. Most of south Wales used English-priority while western, mid, and most of northern Wales were Welsh-priority. New regulations that came into force in 2016 mandate all signs to be in Welsh first, with the existing "English-priority" signage being replaced only when they otherwise would.[16] Bilingual signs were permitted by special authorisation after 1965 and in 1972 the Bowen Committee recommended that they should be provided systematically throughout Wales.

A small number of multilingual signs exist in the UK on major roads that leave major ports (such as Dover). They detail in English, French, German, and, occasionally Swedish, standard speed limits and reminders to drive on the left. Multilingual 'no stopping' signs exist in several locations on the M25.

In the Scottish Highlands and Islands, many road signs have Scottish Gaelic in green, in addition to English in black. This is part of the Gaelic language revival encouraged by many, including the Scottish Government and Bòrd na Gàidhlig.


Road signs in the UK must be retroreflective in order for drivers to read them at night.[17] There are three commonly used grades of materials used:


Road signs in the United Kingdom may be categorised as:

Directional signs

A typical roundabout sign on a primary road.
An old style fingerpost directional sign in the village of Chawton with a county indicator annulus above it.

The term "directional sign" covers both Advance Direction Signs (ADS), placed on the approach to a junction,[18] and Direction Signs (DS) at the junction itself, showing where to turn.[18] A DS has a chevron (pointed) end, and this type is also referred to as a flag-type sign.[19]

An Advance Direction Sign may be one of four types:

Stack type
[18] With the destinations in each direction on a separate panel that also contains an arrow;
[18] To give a highly clear and simplified diagrammatic plan view of a junction, for example a roundabout.
Dedicated lane
[18] Shows the destinations separated by vertical dotted lines to indicate which lane to use;
Mounted overhead
[18] For use on busy motorways and other wide roads where verge mounted signs would be frequently obstructed by other traffic.

An ADS generally has blue, green or white as its background colour to indicate the status of road (motorway, primary or non-primary) on which it is placed. Except on the main carriageway of a motorway, coloured panels are used to indicate routes from the junction being signed that have a different status. A DS should always be a single colour indicating the status of the road to be joined, although there are a few rare exceptions to this rule.

The Heavy and Medium typefaces were designed to compensate for the optical illusion that makes dark lines on pale backgrounds appear narrower than pale lines on dark backgrounds. Hence destinations are written in mixed case white Transport Medium on green and blue backgrounds, and in black Transport Heavy on white backgrounds. Route numbers are coloured yellow when placed directly on a green background. Some signs logically show the closest destination on the route first (i.e., on top), while others show the most distant settlement first. On a roundabout DS, the route locations are usually listed with the closest destination at the bottom and the furthest away at the top when going straight ahead, and likewise going left and right. However, many left-right signs more logically indicate the closest destination at the top with further afield destinations listed in descending order.

Destinations/roads which cannot be directly accessed on a driver's current actual route, but can be accessed via an artery route of that carriageway, are displayed in brackets.

All types of ADS (but not DS) may optionally have the junction name at the top of the sign in capital letters in a separate panel.

A route confirmatory sign is placed either after a junction where distances were not shown on the ADS or DS or is placed on an overhead information sign but does not show distances to the destinations along that route.[19]

Warning signs

Warning of a steep gradient on a road in North Yorkshire, which may cause difficulty for heavy goods vehicles.

The importance of a warning sign is emphasised by the red border drawn around it and the triangular shape.

Sign warning of the risk of horseriders ahead, with a request for motorists to drive slowly.

Regulatory signs

Signs in circular red borders are prohibitive, whether or not they also have a diagonal red line. Circular blue signs mainly give a positive (mandatory) instruction. Such circular signs may be accompanied by, or place on, a rectangular plate (information) that provides details of the prohibition or instruction; for example, waiting and loading plates and zone entry signs.

'Stop' signs (octagonal) and 'give way' signs (inverted triangle) are the two notable exceptions, the distinctive shapes being recognisable even if the face is obscured by dirt or snow.

Informational signs

Informational signs are mainly rectangular (square or oblong) but, strictly speaking, this category also covers directional signs. They are often coloured to match the directional signing for the status of road in question, but where this is not necessary they are generally blue with white text. Examples include "lane gain" and "lane drop" signs on grade-separated roads, and "IN" and "OUT" indications for accesses to private premises from the highway.

Roadworks signs

Roadworks are normally signalled with a triangular, red-bordered warning format is used to indicate that there are works ahead. The graphic is of a man digging. Within the roadworks, diversions and other instructions to drivers are normally given on yellow signs with black script.[20]

Street name signs

Legally these are not defined as traffic signs in the UK. This gives authorities flexibility on the design and placement of them. They can be fixed to a signpost, wall, lamp column, or building. The text is usually in the Transport typeface used on road signs. It is also common for street nameplates to use the serif font designed by David Kindersley.

Location identifiers

Numbered location markers of one type or another are used to identify specific locations along a road. Historically, milestones were used, but since the early 20th century they fell into disuse. However, for administrative and maintenance purposes, distance marker posts and driver location signs have been erected on motorways and certain dual carriageways.[21] The numbers on distance marker posts are embedded into emergency roadside telephone numbers and are used by the emergency services to pinpoint incidents.[22] The advent of the mobile phone meant that location information embedded into motorway emergency telephone systems was not being accessed by drivers and since 2007 driver location signs have been erected on many motorways. These contain important information about the location and carriageway direction, and the reference number should be quoted in full when contacting the emergency services.

Diversion routes

Square diversion route sign on A614 in Finningley, Yorkshire

Diversion routes are marked with black symbols on a yellow patch (square, triangle, circle, or diamond). These mark diversionary routes in the event that the road ahead is closed for any reasons. Motorists can navigate following the symbol, and can find their way back to the original road at a junction above the closure. The four symbols may be filled (solid) or outlines. They are most commonly placed on directional signs, following the route number (e.g. A 25) but may be free standing.

Motorway exits have trigger signs that are normally covered. In the event of a closure, the sign is uncovered and will say, for instance, "To rejoin M6 follow (symbol)". Following the symbol will allow rejoining at a later junction.[23]

On minor roads a simple black on yellow sign with an arrow and the word DIVERSION is used, as here.

Northern Ireland, Crown Dependencies and overseas territories

Road sign in Gibraltar - note the distance is given in metres

The designs of road signs in Great Britain as prescribed in the Traffic Signs Regulations and General Directions (TSRGD) apply specifically to England, Scotland and Wales.[24] These regulations do not extend to other territories that come under the jurisdiction of the Crown. Road signs in Northern Ireland, the Channel Islands and the Isle of Man are under the jurisdiction of their local legislatures. Although the policy in these territories is to align their road signs with those prescribed in the TSRGD, small variations may be seen.

Traffic signs in Northern Ireland are prescribed by The Traffic Signs Regulations (Northern Ireland) 1997 and are administered by the Northern Ireland Assembly. The Tynwald (Isle of Man Parliament), through its Traffic Signs (Application) Regulations 2003, explicitly included Part I of the TSRGD into Manx law, but not the other parts of that legislation. One of the consequences of this partial incorporation is that while in England and Wales speed limit signs must appear on both sides of a carriageway, this is not necessary in the Isle of Man.[25]

Road signs in Gibraltar and the British Sovereign Base Areas in Cyprus are controlled by the Ministry of Defence. In the SBA road signs are modelled on Cypriot road signs rather than British Road signs[26] including the use of metric speed limits[27] while in Gibraltar the signs are similar in appearance to the UK, but in line with the rest of the Iberian Peninsula, road signs use metric units and traffic drives on the right. However, height and width clearance warning and regulatory signs are both in imperial and metric.[28]

Road signs are modelled on U.S. road signs in the British Virgin Islands, whilst signs in other overseas territories such as the Falkland Islands and Cayman Islands are modelled on UK signs.

Additional images

Warning signs

Selection of some of the most common and more rare warning signs on UK roads:

Regulatory signs

Selection of some of the most common and more rare regulatory signs on UK roads:

Speed regulation signs

See also


  1. Oddy, N 'This Hill is Dangerous' in 'Technology and Culture' 56/2, April 2015 pp335-369
  2. "Google Street View of location". Retrieved 28 February 2014.
  3. Description of the work done by Kinneir and Calvert
  4. 1 2 3 4 "Chapter 7". Traffic Signs Manual (PDF). London: The Stationery Office. 19 October 2005. p. 8. ISBN 978-0-11-552480-6. Retrieved 19 October 2014.
  5. "KeySIGN". KeySIGN Product Specification. Key Traffic Systems. Retrieved 17 August 2011.
  6. "Q&A: Pounds, pints and the EU". BBC News. British Broadcasting Corporation. 11 September 2007. Retrieved 29 December 2007.
  7. "Call for metric road sign switch". BBC News. British Broadcasting Corporation. 23 February 2006. Retrieved 29 December 2007.
  8. "Height and width road signs to display metric and imperial". BBC News. 2014-11-08. Retrieved 2014-11-08.
  9. "Impact Assessment of the Traffic Signs (Amendment) Regulations and General Directions 2010 and of the Traffic Signs (Temporary Obstructions) (Amendment) Regulations 2010" (PDF). Department for Transport. Retrieved 19 October 2014.
  10. "The Traffic Signs (Amendment) Regulations and General Directions 2010" (PDF). Department for Transport. Retrieved 19 October 2014.
  11. "Height and width road signs to display metric and imperial". BBC News. 2014-11-08. Retrieved 2014-11-08.
  12. Department of Transport: "Local Transport Note 1/94", page 1. HMSO, July 1994.
  13. 1 2 3 4 5 6 "Chapter 7". Traffic Signs Manual (PDF). London: The Stationery Office. 19 October 2005. p. 16. ISBN 978-0-11-552480-6. Retrieved 19 October 2014.
  14. UK Statutory Instrument:"The Traffic Signs Regulations and General Directions 2002",The Stationery Office, 2002
  15. "Dartmoor Leaflet Part 2" (PDF). Dartmoor National Park Authority. Retrieved 16 September 2011.
  16. Road Safety GB 31 March 2016
  17. "Reflectorisation of Traffic Signs" (PDF). Highways Agency, etc. Retrieved 19 October 2014.
  18. 1 2 3 4 5 6 "Chapter 7". Traffic Signs Manual (PDF). London: The Stationery Office. 19 October 2005. p. 14. ISBN 978-0-11-552480-6. Retrieved 19 October 2014.
  19. 1 2 "Chapter 7". Traffic Signs Manual (PDF). London: The Stationery Office. 19 October 2005. p. 15. ISBN 978-0-11-552480-6. Retrieved 19 October 2014.
  20. "Chapter 7". Traffic Signs Manual (PDF). London: The Stationery Office. 19 October 2005. pp. 116–117. ISBN 978-0-11-552480-6. Retrieved 19 October 2014.
  21. Highway Agency. "Identification of Incident Locations". Retrieved 25 July 2009.
  22. Highway Agency. "Driver Location Signs (March 2007)". Retrieved 25 July 2009.
  23. CBRD: Emergency Diversion Routes
  24. "Statutory Instrument 2002 No. 3113; The Traffic Signs Regulations and General Directions 2002". Controller of HMSO. 16 December 2002.
  25. "THE CHIEF CONSTABLE v MITCHELL & OTRS". The Isle of Man Courts. 11 June 2009. Retrieved 2 February 2010.
  26. "Website of the Sovereign British Area, Cyprus". Administration of the Sovereign British Area, Cyprus. Retrieved 8 December 2009.
  27. "Public Instrument 41 of 2008, MOTOR VEHICLES AND ROAD TRAFFIC (MOTORWAY AND SPEED LIMITS ORDER 2008), Published 2 December 2008" (PDF). Administration of the Sovereign British Area, Cyprus. Retrieved 8 December 2009.
  28. "Getting Around - Driving". Tourism. Retrieved 8 December 2009.
Wikimedia Commons has media related to Road signs in the United Kingdom.
Official government websites
Other resources
This article is issued from Wikipedia - version of the 11/25/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.